PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch

• PSI Woodworking Long Ranger dust collector switch with 110-volt 1-1/2-horspower engine and 20-amp relay receiver


• Turn on a dust collector from anywhere in the shop


• Uses R.F. signal which is not affected by outside interference by large television transformers electrical noise or three-phase power sources


• Includes a circuit breaker in the receiver and a 5-foot power cord


• Ships at 1.84-pounds

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

JET 708620B AFS-1000B 550/702/1044 CFM 3-Speed Air Filtration System with Remote and Electrostatic Pre-Filter

The Jet 3-speed air filtration systems clean and circulate the air in your shop while you work filtering 98-99 of all particles five microns in size and 85 of particles one micron in size. And with the timer you come into your shop set the timer for two four or eight hours and forget it. The system automatically shuts down at the time youve set. They use a convenient standard size outer filter run quietly and come with a remote control for convenience.Grabs 98 of anything from 5 microns up in size and 89 of single micron size particles. Prefilter is 5 micron. Inner filter is 1 micron. Outer filter is a disposable electrostatic filter with a paper frame. Units are designed to be set on a workbench or hung from the ceiling either tight against the ceiling or hanging from chains. Eyebolts are in place for hanging the unit. The three pocket filter fits inside and can be blown out. Filters are easily replaced without tools. The powder coated metal box is heavy duty. Fan and motor are also constructed for durability. Two easy grip handles inset on both sides for ease of handling. Quiet running so it can be left on during work. Model AFS-1000B is 1044 CFM and has 3 speed: 550 702 and 1044 CFM. The AFS-1000B can filter the air in a 20 x 20 x 8 shop in under five minutes and filter the air in that size shop a dozen times an hour. Includes a paper filter.

• Air filter system with remote and electrostatic pre-filter; includes programmable timer


• Filters 98 percent of all 5-micron particles; 85 percent of 1-micron particles


• Durable steel housing


• Includes filter system remote electrostatic filter and eyebolts to hang on ceiling or place on workbench


• 30-1/4 by 24 by 12 inches; 54 pounds; 1-year warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

SHOP FOX W1685 1.5-Horsepower 1280 CFM Dust Collector

Powerful Shop Fox dust collector features a heavy-duty 12in. steel impeller and a 1.5 HP 16 Amp 110V single phase motor that operates at 3450 RPM. Generates 1280 CFM air suction to capture dust and debris from any woodworking saw planer jointer band saw shaper or sander with a dust port. HP: 1 1/2 Volts: 110 CFM: 1280 Hose Diameter (in.): Dual 4in. ports off a 6in. inlet

• Powder coated paint


• Bag volume: 5.4 cubic feet


• Static pressure: 10.1-Inch


• Air suction capacity: Approximately 1280 CFM

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

PSI Woodworking DBGULP Big Gulp Dust Hood

• Dust hood with a 13-by-16-inch opening


• Perfect for miter saws lathes radial arm saws carving sanding and planers without hoods


• Lightweight and portable; made from tough ABS plastic


• 4-inch port to connect to any dust collection system


• Weighs 2.2 pounds

More detail ...